TotalEnergies Corbion B.V.

News

Breakthrough Luminy PLA Grades: Meltblown Filtration, Foam PS Replacement & Circular Carbon rPLA Series

Global bioplastic converters, filtration manufacturers, foam packaging producers and brand procurement teams are facing overlapping sustainable material dilemmas. Fossil PP, EPS and XPS are restricted by carbon regulations and single-use bans; many generic PLA alternatives fail on core processing performance, batch consistency or credible carbon accounting. This portfolio of four breakthrough Luminy PLA grades targets these segmented pain points, delivering verified performance, stable production window and auditable carbon credentials for different industrial scenarios.

Luminy L040 — Meltblown Filtration Grade, >95% Filtration Efficiency Filtration nonwoven buyers’ top pain points: conventional PLA meltblown materials suffer from poor thermal stability, frequent filament breakage, narrow processing window and fast electrostatic charge decay, which leads to unstable filtration efficiency and high scrap rate. Most PLA meltblown materials also require costly line modification or extra degradation agents to reach ultra-fine fiber structure, raising trial cost and downtime.

Luminy L040 is purpose-built for meltblown nonwoven lines. It can produce ultra-fine fibers down to ≤1μm on existing meltblown equipment without major retrofitting. It maintains stable electrostatic charge retention, delivering consistent filtration efficiency above 95% for air purification, HVAC, industrial filtration and hygiene media. Compared with PP meltblown, it cuts carbon footprint dramatically and remains fully compostable under EN13432. We provide full TDS, COA and processing parameter guidance to reduce nozzle clogging, fibre dispersion and yield fluctuation for nonwoven producers.

Luminy FOAM 50F — High Melt Strength Foam Grade, Direct PS/XPS Replacement Foam packaging and insulation converters struggle with a classic PLA bottleneck: standard virgin PLA has low melt strength. Bubbles easily coalesce and collapse during foaming, resulting in uneven cell structure, high density and poor cushioning performance. Most modified PLA foam materials require complex formula adjustment, while EPS/XPS, though easy to process, cannot meet global compostable and low-carbon mandates.

Luminy FOAM 50F is engineered with enhanced extensional viscosity and high melt strength, solving the bubble collapse issue. It supports continuous extrusion foaming and bead foaming, producing uniform closed-cell foam. It acts as a drop-in alternative to PS and XPS for protective cushioning, cold chain insulation packaging and lightweight inserts. It features a wider processing tolerance, less sensitive to minor temperature and pressure drift, helping foam manufacturers lower formulation R&D cost and speed up certification for eco-packaging brands.

Luminy rPLA 30% — Carbon Neutral Recycled PLA Brands targeting carbon neutrality often encounter recycled PLA pain points: vague recycled content claims, inconsistent mechanical performance, poor colour stability and lack of third-party LCA verification. Many recycled PLA batches cannot pass food-contact compliance, limiting usage in food packaging.

Luminy rPLA 30% is carbon-neutral certified by independent LCA assessment. It adopts mass balance allocation from clean pre-consumer and post-consumer PLA waste streams. Its mechanical, thermal and processing performance matches virgin Luminy PLA, supporting food-contact applications. It is an ideal transitional grade for buyers who need to declare carbon neutrality without redesigning moulds or adjusting existing production lines. Batch-to-batch consistency is strictly controlled, avoiding the common risk of fluctuating MFI and discoloration seen in generic recycled PLA.

Luminy rPLA 100% — Negative Carbon Footprint Recycled PLA For advanced climate-positive brands aiming beyond carbon neutrality, the biggest procurement headache is finding credible negative-carbon bioplastics. Many green claims are marketing-only without audited life-cycle data.

Luminy rPLA 100% carries a verified negative carbon footprint, locking biogenic carbon longer through closed-loop recycling. The material stores more atmospheric carbon than it releases during production. It retains the same processing flexibility as virgin PLA and is suitable for packaging, rigid containers and disposable articles. It supports brands to fulfil ambitious ESG targets, carbon reporting and eco-label submission for EU and North American markets.

All four grades share the core advantages of Luminy PLA: plant-based feedstock, EN13432 compostability and complete documentation packages. They can be combined flexibly according to project goals: L040 for filtration, FOAM 50F for foam substitution, rPLA 30% for carbon-neutral mass production and rPLA 100% for premium climate-positive product lines.

We support sample testing, trial run technical support, bulk spot supply and full compliance files including COA, TDS, food contact certificates and LCA carbon reports. Our technical team helps you resolve process issues, compare material options and avoid costly trial-and-error when switching from fossil plastics to functional, circular Luminy PLA.

TotalEnergies Corbion B.V.

Need Quality Chemicals You Can Trust?

Get in touch with our team to discuss your chemical product requirements, request samples, or explore how we can support your business with tailored solutions.