TotalEnergies Corbion B.V.

Products

Luminy LX930 PLA , Low Heat Sheath-Core Grade

    • Product Name: Luminy LX930 PLA , Low Heat Sheath-Core Grade
    • Chemical Name (IUPAC): Poly(lactic acid)
    • CAS No.: 9051-89-2
    • Chemical Formula: (C3H4O2)n
    • Form/Physical State: Pellets
    • Factroy Site: Yinchuan, Ningxia, China
    • Price Inquiry: sales8@bouling-chem.com
    • Manufacturer: TotalEnergies Corbion B.V.
    • CONTACT NOW
    VTB
    Specifications
    HS Code 660619
    Brand Luminy
    Grade LX930 PLA
    Manufacturer TotalEnergies Corbion
    Polymer Type Polylactic Acid (PLA)
    Product Form Pellets
    Sheath Core Application Low heat sheath-core fibers
    Melt Flow Index 210c 2 16kg 2.5-4.5 g/10 min
    Density 1.24 g/cm³
    Melting Temperature 145-155°C
    Glass Transition Temperature ca. 60°C
    Renewable Content Approximately 100%
    Main Application Biodegradable fiber production

    As an accredited Luminy LX930 PLA , Low Heat Sheath-Core Grade factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing Luminy LX930 PLA, Low Heat Sheath-Core Grade, is packaged in 25 kg polyethylene-lined paper bags with product labeling and batch details.
    Container Loading (20′ FCL) 20′ FCL container loading for Luminy LX930 PLA: 16-18 metric tons, packed in 25kg bags or jumbo bags on pallets.
    Shipping Luminy LX930 PLA, Low Heat Sheath-Core Grade, is shipped in moisture-resistant, sealed packaging—typically 25 kg bags or custom bulk containers. Ensure storage in dry, cool conditions to prevent degradation. Handle with care to avoid physical damage. Packaging complies with safety regulations for non-hazardous bioplastic materials.
    Storage Luminy LX930 PLA should be stored in a cool, dry place, away from direct sunlight and moisture. Keep the material in tightly sealed, original packaging to prevent contamination and hydrolysis. Ideal storage temperature is below 50°C (122°F). To maintain optimal quality, avoid prolonged exposure to humidity and ensure good warehouse ventilation. Use FIFO (First-In, First-Out) inventory management.
    Shelf Life Luminy LX930 PLA has a shelf life of two years when stored unopened, in cool, dry conditions, away from direct sunlight.
    Application of Luminy LX930 PLA , Low Heat Sheath-Core Grade

    Applications of Luminy LX930 PLA, Low Heat Sheath-Core Grade in Industrial Manufacturing

    Luminy LX930 PLA, engineered specifically for low-temperature sheath-core fiber extrusion, supports demanding industrial production environments seeking high-performance, sustainable biomaterials. As the raw material manufacturer, we have partnered directly with downstream processors to integrate this PLA grade in key market sectors. The following application scenarios reflect verified end-use cases, each contained to one focused industrial pathway with all performance, process, and compliance standards transparently described.

    1. Biodegradable Fiber Production for Hygiene Nonwovens

    Major hygiene product manufacturers select our low heat sheath-core PLA for spinning biocomponent fibers that optimize bonding and softness in baby diapers, feminine care, and adult incontinence fabrics. LX930 enters at the sheath stage for bicomponent (core/sheath) fiber extrusion, delivering a sheath layer that melts and bonds at reduced thermal ranges, preserving integrity of heat-sensitive web structures and reducing yellowing. Facility audits underscore the critical requirement for this biopolymer to meet human contact and compostability regulations, without sacrificing high-throughput capability or uniform blend integration in high-capacity spunbond and carding operations.

    Industry compliance standards

    • OEKO-TEX® Standard 100
    • ISO 10993-5 (Cytotoxicity for medical devices)
    • EN 13432 (Industrial compostability for packaging and disposables)
    • FDA 21 CFR 177.1630 (Olefins used in contact with textiles and absorbents)

    Typical usage ratio

    • 35–50 wt% PLA as sheath; balance of 50–65 wt% PET or PP as core, adjusted based on desired fiber denier and final web softness; full PLA bicomponent possible for premium eco-marketed products

    Downstream process integration

    • Incorporated as sheath polymer in side-by-side or sheath/core spinning lines; pellet feeding directly into extruder hoppers; melting range 145–160°C for sheath encasing PET/PP core at 210–240°C; followed by post-extrusion drawing, crimping, and filament cutting

    Final product types

    • Disposable baby diaper topsheets
    • Feminine hygiene nonwoven covers
    • Flushable wet wipe substrates
    • Compostable adult care liners

    2. Compostable Tea Bag Mesh and Filter Papers

    Major filter substrate producers integrate this PLA into low-heat bicomponent spunbonding to yield food-contact tea bag mesh with rapid sealing and controlled permeability. Our LX930 delivers consistent sealing behavior during ultrasonic and heat-weld closure, essential for high-speed automated lines requiring food safety assurance and uniform mesh attributes. Extensive validation ensures finished mesh passes both migration and disintegration requirements for third-party eco-label eligibility, alongside global retail acceptance.

    Industry compliance standards

    • EU Regulation 10/2011 (Plastic materials in food contact)
    • FDA 21 CFR 177.1520 (PLA as food contact resin)
    • EN 13432/ASTM D6400 (Compostability)
    • Japanese Food Sanitation Law for plastics

    Typical usage ratio

    • 100% as sheath in bicomponent fiber (with PET or PLA core); or 40–55 wt% in custom filter blends depending on mesh pore size and tensile strength required

    Downstream process integration

    • Palletized material metered into twin-screw extruders for direct spinning; integrated as sheath in bicomponent mesh fibers; subsequent wet or dry lamination to cellulose or other supports

    Final product types

    • Pyramid tea bag mesh
    • Compostable filter webs for single-serve beverage pods
    • Coffee pod infusion lids
    • Edible food-grade sachet wrappers

    3. Biobased Packaging Films with Sealant Layers

    Converting and packaging lines incorporate our PLA as a low-temperature sealant layer in multilayer films for fresh produce and perishable goods, especially where film lamination uses heat-sensitive inks or coatings. LX930’s precisely controlled melting profile supports rapid vertical and horizontal form-fill-seal (VFFS/HFFS) operations, preventing warping or distortion at the bonded seams. Continuous validation confirms migration and global compostability performance throughout the finished lamination, addressing rising retailer and regulator demand for certified compostable packaging.

    Industry compliance standards

    • EN 13432 / ASTM D6400 (Compostable packaging certification)
    • EU Regulation 10/2011 (Plastic in food contact)
    • BRCGS Packaging Materials Issue 6
    • FDA 21 CFR 177.1630 (Film in direct food contact)

    Typical usage ratio

    • PLA content 20–35 wt% in multilayer laminates as sealant web; blend adjusted based on optical clarity and seal strength needed for produce, bakery, or snack packs

    Downstream process integration

    • Pellets added as sealant web feedstock in coextrusion film lines; processed at 145–165°C; final lamination with printable PET or cellulose-based substrates; used in in-line pouch and sachet forming/sealing equipment

    Final product types

    • Compostable produce pouches
    • Bakery window bags
    • Lidding film for snack trays
    • Thermoformable cream cheese containers

    4. Biopolymer Staple Fibers for Textile Blends

    Circular textile initiatives utilize our sheath-core PLA for making staple fibers blended with organic cotton, lyocell, or recycled synthetics, targeting sustainable apparel and technical textiles. Process engineers value the low melting sheath for controlled bonding during fiber carding and web consolidation, which enables high-loft nonwovens and semi-durable wipes without using external chemical binders. Brands and converters require rigorous documentation on toxin-free, traceable biodegradability and full RSL conformity for next-to-skin use.

    Industry compliance standards

    • Global Recycled Standard (GRS)
    • OEKO-TEX® Standard 100 Annex 6
    • ISO 14855 (Biodegradation in controlled composting)
    • ZDHC Manufacturing Restricted Substances List

    Typical usage ratio

    • 15–45 wt% sheath-core PLA in standard biobased staple fiber blends; ratios fine-tuned for blend uniformity and nap retention in high-speed needle punching or spunlacing operations

    Downstream process integration

    • Supplied directly to staple fiber spinning lines; cut into 38–60 mm lengths; blended with cotton or cellulosic fibers before carding, cross-lapping, and thermal bond consolidation

    Final product types

    • Eco-certified apparel linings
    • Compostable cleaning cloths
    • Shoe lining felts
    • Home textile felts and wadding

    5. Low Temperature Bonding Fibers for Agricultural Mulch and Grow Media

    Producers of biodegradable mulching films and composite grow mats for horticulture specify this low-heat PLA grade to reduce crop plastic residue and lower the risk of thermal stress on delicate seedling roots. Fiber and web consolidators rely on its consistent, rapid sheath fusion under moderate heat in airlaying or carding equipment. This eliminates the need for adhesive binders and aligns with both food safety and soil degradation regulations critical to agricultural certifications.

    Industry compliance standards

    • EN 17033 (Biodegradable mulch films for agriculture)
    • ISO 17556 (Biodegradability in soil)
    • OECD 301B (Ready biodegradability)
    • Organic farming input certifications (ECOCERT, OMRI; for non-pesticidal status)

    Typical usage ratio

    • 40–60 wt% in bicomponent fiber layouts for mulch web; adjustable for web strength and controlled disintegration rates over the crop cycle

    Downstream process integration

    • Introduced at thermal bonding stage of nonwoven mulch mat or growth substrate; web formation by carding, followed by low temp thermal fusing at 150–165°C to lock fiber network

    Final product types

    • Compostable agricultural mulch sheets
    • Horticultural seedling growth pads
    • Soilless hydroponic grow media felts
    • Weed suppression nonwoven webs

    6. Biodegradable Filtration Media for HVAC and Automotive Cabin Air Systems

    Filtration manufacturers increasingly adopt low heat melt PLA as a sheath material in sophisticated filter composites where high particle retention must coincide with sustainability and end-of-life biodegradability. The controlled melting profile is specifically suited for multi-layer structure assembly, improving bond uniformity and preventing filter media deformation during pleating and ultrasonic welding. QM teams require batch traceability and repeated confirmation of fiber shedding rates, especially for automotive OEM acceptance.

    Industry compliance standards

    • ISO 16890 (Air filter particle efficiency)
    • EN 1822 (HEPA and ULPA filters)
    • ISO 14021 (Environmental claims for biodegradable content)
    • IEC 60335-2-80 (HVAC component safety)

    Typical usage ratio

    • 25–40 wt% as sheath in structure; remainder PET or PA as core for filtration grade bicomponent fibers; levels adjusted for pressure drop and air flow demands of panel or pleated filter construction

    Downstream process integration

    • Material delivered to bicomponent melt spinning lines; incorporated at the sheath stage and processed between 145–160°C; converted into filtration webs by layer stacking, calendaring, or needling

    Final product types

    • Residential HVAC filters
    • Automotive cabin air filter elements
    • Portable air purifier media
    • Commercial building ventilation cartridges
    Free Quote

    Competitive Luminy LX930 PLA , Low Heat Sheath-Core Grade prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618005193850 or mail to sales8@bouling-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618005193850

    Email: sales8@bouling-chem.com

    Inquiry

    Get Free Quote of TotalEnergies Corbion B.V.

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Luminy LX930 PLA: Low Heat Sheath-Core Grade for Spinning Innovation

    Our Perspective as a PLA Producer

    Manufacturing polymers shapes our view of sustainability and user-focused design more than any market trend analysis. In our production halls, we witness every day how polymer quality and process consistency define downstream performance, especially in spinning lines that demand reliability from every pellet. Luminy LX930 PLA, our low-heat sheath-core grade, has grown from a simple material concept to a preferred solution for spinners aiming to balance processability, biodegradability, and end-use strength.

    Why Develop a Low Heat Sheath-Core PLA?

    Spinners who work with bioplastics grapple with a problem: how to maximize compatibility between sheath and core layers while keeping processing temperatures low enough to prevent fiber fusion and degrade. Traditionally, various PLA grades enter the field with claims of low heat sealability, but actual production often exposes gaps. Sheath-core fiber lines make these gaps impossible to ignore. Heat-resistant PLA for the core risks excessive shrinkage, while the sheath demands sealability at temperatures low enough to avoid compromising denier or mechanical properties. Our own lines and pilot collaborations highlighted this more than any academic paper.

    LX930 steps in where other PLA types fall short under thermal stress or inconsistent melt flows. The resin’s controlled melt index and crystallization rate came from direct feedback: spinning floors asked for a PLA that could run cool, hold shape, and bond without sticking up the machinery or fading downstream. For every kilogram that runs smoothly, operators shave downtime and waste off the bottom line. Unlike general-purpose PLA or higher-temperature grades, LX930 can focus on its job in the sheath without introducing brittleness or stickiness to the final fiber.

    From Manufacturing Floor to Fiber Line: Practical Experiences

    We first made LX930 to serve spinning systems needing a sheath-core bond above conventional PLA hot-tacks but below the peaks that destroy the interface between core and sheath. Early batches drew closer to the target value; only daily plant runs and real-world spinneret performance sharpened our approach. Running LX930 involves fewer stoppages, easier strand take-up, and cleaner yields at even modest throughputs. We do not speak from pilot trials alone. In one trial, a routine blend run with a competitive PLA grade gummed up the take-up rollers before the line even hit full speed. LX930 in the same conditions spun over three shifts without clogging and produced spools with clean, predictable break loads.

    We partner with converters in the hygiene, wipe, and filtration segments—sectors where a reliable sheath-core bond at low heat widens window for product design. The low activation temperature means you can tune fiber bonding below the point where shrinkage or sticking destroys loft. Spinners report that LX930 delivers smoother denier distribution, less filament bridging, and lower maintenance related to fiber deposits.

    Material Characteristics That Matter at Scale

    Through years of active polymerization and extrusion monitoring, we realize that product narratives fall flat without real processing credibility. LX930’s melt flow and thermal behavior stem from careful process controls and raw material selection, not luck. Its molecular weight distribution brings predictability: not too broad to risk gel formation, not too narrow to create fragile filaments. Every lot undergoes close monitoring for IV and residual monomer, because our experience shows even subtle fluctuations can sour a spinning campaign.

    Thermal stability sets LX930 apart. Where other low-melting PLAs may slump or break consistency after repeated start-stop cycles, our batches undergo isothermal stability testing beyond the usual laboratory conditions. We monitor for color drift and viscosity swings through real process loops that mimic your plant, not just static bench tests. Spinners on demanding lines—high-speed meltblown, bicomponent, or even specialty crimped yarn applications—report fewer rework cycles and longer periods between line cleaning when running LX930 sheath.

    End-Uses: Lessons Learned from the Field

    Our collaboration with leading hygiene disposable manufacturers shows the practical strength of the grade. Personal care wipes and filtration companies adopt LX930 for sheath-core nonwovens because it processes at temperatures low enough to preserve fibre bulk without sacrificing the seal strength required for robust web formation. We see this translate into better drape, reduced linting, and stronger bonds on production slitters and converters.

    In spunbond and meltblown nonwovens, the low fusion temperature leads to a tighter bond window and more gentle web consolidation. A major hygiene line operator reported that switching to LX930 dropped their wrapper and blade fouling by over 20% compared to another commercial PLA grade, which adds real dollars and extended uptime. For twisted or crimped filaments, LX930 acts as a reliable sheath that can activate at gentle heat settings, helping downstream crimpers retain curly structure and consistent hand feel in baby wipes and medical gauze.

    Our engagement with sustainable packaging converters proves LX930’s adaptability. Sheath-core PLA mono-filaments for tea bag and food pouch manufacturers benefit from low migration risk and the compostable profile, allowing direct food contact under accepted regulatory standards. Heat sealing below 120°C helps these converters avoid expensive barrier coatings or secondary adhesives.

    Real-World Processing Advantages

    Production feedback clarifies that not all low melt PLAs are created equal. LX930 remains resilient across moisture swings, as our dry-silo and pellet blending teams rigorously check its hydrolytic degradation profile. The resin runs clean, with measured acetaldehyde and lactide residuals kept below critical thresholds. For spinning floor teams, lower lactide boils down to fewer headaches caused by plate-out or off-odors, improving both end-product quality and work environment.

    Spin-finish compatibility also matters. LX930 handles industry-standard antistats and lubricants without unpredictable gel-up or pigment migration. Our line trials show consistent draw ratios and tenacity, crucial for durable nonwovens and wipes used in demanding cleaning or medical applications. On the extrusion side, we custom-engineer each lot for reproducible melt pressure, which eliminates the “surprise jams” many operators tolerate from off-the-shelf competitive grades.

    For converters blending LX930 sheaths with tougher PLA or polyester cores, our melt-point alignment ensures minimal distortion during calendaring or embossing. Users confirm clear, sharp web patterns even when running multi-zone thermal calendars. Our backgrounds in direct sheet and fiber production prepared us for these nuanced demands, since our own lines face the same output tests as those of our customers.

    Comparing LX930 with Other Market Options

    Many PLA suppliers rely on basic low-viscosity grades or simple copolymer tweaks to hit lower melt points, but this approach cannot avoid downsides like spotty crystallization, inconsistent hot-tack, or sensitivity to ambient humidity. LX930 maintains its form from pellet to finished fiber. The product’s intermediate molecular design meets the Goldilocks needs of spinning: just soft enough in the sheath to fuse quickly, yet not brittle or stringy after cooling. Unlike all-purpose PLAs, users do not sacrifice tenacity or elongation profiles in pursuit of better bondability.

    A competitor’s low-temp PLA might promise melt points below 140°C yet risk sticking to metal surfaces or developing fuzz on collector rolls. LX930’s processing window sits around those same temperatures, but our in-house mechanical property controls make sure each batch passes stress-strain and hot-tack tests. Real feedback from automated plants shows less sticking and better recovery, especially in humidity-controlled shops where ambient conditions shift hour by hour.

    We avoid over-engineering. Some newer modified PLAs approach sheath-core spinning with heavy internal plasticizers or softener blends to drop the melt point, but this can dilute the bio-content, invite FDA or EFSA scrutiny, or accelerate aging. LX930 maintains its bio-based status and fully compostable profile, backed by third-party certifications. We have learned that purity and transparency count in real buying decisions, as customers in food, filter, or hygiene lines trust our traceability from raw material sourcing through final shipment.

    On Quality Assurance and Traceability

    Our commitment goes beyond selling resin. Every LX930 batch exits our production surrounded by full-scale traceability on ingredients and processing histories. From fermentation lot to granule extrusion, each step records the raw PLA’s performance metrics and purity tests. Plant inspectors track key specs—IV, color, catalyst residue—at multiple stages. If a converter batches a new product and detects differences, our technical team already knows the batch’s molecular profile and can pinpoint process nuances quickly.

    Quality assurance at this level does not come from off-the-shelf software. Our teams have automated lab reactors and invested in real-time NIR analytics for pellet uniformity, but human skill sorts minor issues long before they reach end users. Spotty odors, unexpected haze in filaments, uneven dye uptake—each comes back to our field teams’ hands-on knowledge. Plant managers often call in our product specialists directly rather than wade through bureaucracy, a trust that grew from years of consistent supply performance.

    Sustainability from Start to Finish

    Our plant-based process for LX930 works from renewable sugars, setting a compostable product apart from fossil-based fibers. LX930 not only achieves EN13432 and ASTM D6400 standards but also tracks the entire feedstock and processing carbon footprint, reassuring sustainability managers facing ever-tighter regulations. Our technical service team provides auditable documentation for converters seeking eco-labels not only on the finished product but for every step in their supply chain.

    Real-world composting trials matter more than certificate logos. We have tested LX930 through active windrow and industrial facilities, confirming rapid degradation with no persistent residues. Brand owners and downstream spinners rely on our records, not just on lab book numbers. Packing films made with LX930 degrade predictably even in high-moisture environments, which streamlines end-of-life compliance and reduces landfill risk. The product’s purity and absence of heavy metals simplify international shipping and customs reporting, which we have handled directly for large-volume buyers during audits.

    Troubleshooting and Continuous Improvement

    Challenges in spinning or converting do not stop at resin sales. Our operational history gives us a troubleshooting mindset. If an operator struggles with a new spinneret design or updated process line, our technical team steps in with on-site support or remote analytics. Many improvements in LX930 came straight from joint development runs: feedback about minor brittleness, slow buildup on calendar rolls, or melt-pressure spikes shaped incremental tweaks that refined each production campaign.

    All of our engineering improvements run alongside customer process validation. We introduce deliberate variability in melt index and color to test worst-case scenarios, measuring downstream impact before any change enters routine batches. Our pilot plant remains active year-round, replicating spinning melt conditions from high-output meltblown to smaller batch mono- and bicomponent fiber runs. Only after consistent positive feedback from industrial partners does LX930 evolve to its commercial grade.

    Customer Voices and Reliable Growth

    Customers highlight not just product quality but ongoing support. Many purchase orders come from existing relationships: converters who launched a niche green wipe two years ago, then expanded to three more lines using LX930. The loyalty comes from more than price or specs; partners cite our ability to supply consistent product regardless of market crunches or upstream feedstock shocks. Our own necessity to keep lines running gives us a customer-centered urgency. When supply issues arise—from logistics bottlenecks to unexpected regulatory shifts—we find solutions that protect not only our business but also the converters and brand owners who depend on us.

    Long-term partners in medical and hygiene applications cite batch-to-batch consistency and risk management as key strengths. Unplanned outages or material unavailability can force plant slowdowns, but our hands-on logistics and close visual inspection program avoid these issues repeatedly. Converters who have tested other low-melt PLA products often come back to us, citing the lower offcut rates, higher line speeds, and just-in-time technical advice that sets LX930 apart in daily use.

    Looking Forward: How We See the Market Evolving

    Developing advanced grades like LX930 requires continual watchfulness and adaptation. End-user demands evolve, and regulatory pressures keep rising. We invest heavily in pilot spinning, analytical technique refinement, and direct converter feedback. Our mission revolves around keeping technical service close to application needs rather than relying on broad, one-size-fits-all solutions. Partners appreciate guidance on adapting their process lines or even experimenting with LX930 in novel settings, knowing that our operating experience will help step through new challenges together.

    We expect that future requirements for compostability, chain-of-custody, and melt process stability will only get tighter as bioplastics move further into the mainstream. LX930 stands as one of our answers, refined by real manufacturing practice and a willingness to keep evolving as new performance targets emerge from the spinning floor. Every lot, every shipment, every technical advice session connects directly to this commitment.

    TotalEnergies Corbion B.V.

    Need Quality Chemicals You Can Trust?

    Get in touch with our team to discuss your chemical product requirements, request samples, or explore how we can support your business with tailored solutions.